DigiTech HARDWIRE DL-8, Owner'S Manual, Page: 16 / 32

10
Loop Delay
The Loop Delay type is used to create an infinite stereo delay loop up to 20
seconds long. Once a loop is created, you can add overdub parts to it.
To use the Loop type, do the following:
1.
Select LOOP using the Type knob.
2.
Press and hold the Foot Switch. The Indicator LED begins flashing RED
indicating the Loop is ready to begin recording.
3.
While still holding down the Foot Switch, begin playing your instrument. The
Indicator LED lights solid RED indicating the pedal is recording.
4.
When you reach the end of your passage, release the Foot Switch. The
Indicator LED lights solid GREEN and the passage you recorded plays back
in an infinite loop.