DigiTech HARDWIRE DL-8, Owner'S Manual, Page: 14 / 32

8
Tap Tempo Delay
The DL-8’s Foot Switch can be used as a Tap Tempo switch for setting the delay
time during a live performance.
To access Tap Tempo, do the following:
1.
While the delay effect is bypassed, press and hold the Foot Switch for 3
seconds. The effect turns on and the Indicator LED lights solid RED. After
3 seconds of holding the Foot Switch, the Indicator LED begins flashing
GREEN. The flashing GREEN LED indicates Tap Tempo mode is now active
and the LED flashes at the current delay time’s duration.
2.
Tap the Foot Switch at least two times to set a new delay time. The last two
pedal tap intervals set the delay time. The TIME knob is disabled when Tap
Tempo is active, and the delay cannot be bypassed until the Tap Tempo is
exited.