background image

WARNING

For your protection, read the following:

Important Safety Instructions
 1. Read these instructions.
 2. Keep these instructions.
 3. Heed all warnings.
 4. Do not use this apparatus near water.
 5. Clean only with dry cloth.
 6.  Do not block any ventilation openings. Install in accordance 

with the manufacturer’s instructions. 

 7.  Do not install near any heat sources such as radiators, heat 

registers, stoves, or other apparatus (including amplifiers) 
that produce heat.

 8.  Protect the power cord from being walked on or pinched 

particularly at plugs, convenience receptacles, and the point 
where they exit from the apparatus.

 9.  Unplug this apparatus during lightning storms or when 

unused for long periods of time.

10.  No user serviceable parts inside. Refer all servicing to 

qualified service personnel. Servicing is required when 
the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled 
or objects have fallen into the apparatus, the apparatus 
has been exposed to rain or moisture, does not operate 
normally, or has been dropped.

11.  WARNING: To reduce the risk of fire or electric shock, do 

not expose this apparatus to rain or moisture.

12.  Refer to labels on the unit, including bottom cover, for 

other markings and pertinent information.

ELECTROMAGNETIC

COMPATIBILITY

 

This device complies with part 15 of the FCC Rules 
and the Product Specifications noted on the Declara-
tion of Conformity. Operation is subject to the fol-
lowing two conditions:

• 

 this device may not cause harmful interference, 
and 

• 

 this device must accept any interference received, 
including interference that may cause undesired 
operation. 

Operation of this unit within significant 
electromagnetic fields should be avoided.

• 

use only shielded interconnecting cables.

If you want to dispose of this product, do not mix it with general household waste. 
There is a separate collection system for used electronic products in accordance with 
legislation that requires proper treatment, recovery, and recycling.

Private households in the 25 member states of the EU, in Switzerland and Norway may return their 

used electronic product free of charge to designated collection facilities or to a retailer (if you 

purchase a similar new one).

For countries not mentioned above, please contact your local authorities for a correct method of 

disposal.

By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery, 

and recycling and thus prevent potential negative effects on the environment and human health.

Summary of Contents for HARDWIRE CR-7

























Reviews: