Storing/Copying/Naming a Preset
Once the Preset has been modified to your liking, you may store your settings to any of the 40
User Preset locations (Presets U1-U40). The following steps outline the procedure for storing
changes to a Preset or copying a Preset to a different location:
1. Press the
Store
button once. The Store button LED will blink and the first character in
the Display will Flash indicating that you can now name your custom creation.
2. Use the
Number 1 Knob
or
Up/Down Footswitches
to select the desired alpha-
numeric character.
3. Rotate the
Number 2 Knob
clockwise to select the next character location, and
counterclockwise to select the previous character location. Then repeat step 2 to select
the desired alpha-numeric character.
4. Once the desired name is shown in the display, press the
Store
button again to enter the
second stage of the storing process. The Display will alternate between showing the new
name, and the name of the Preset about to be overwritten.
5. Select the User Preset location your new sound will reside in using the
Number 5
Knob
or the
Up
/
Down Footswitches
. The Display will continue to alternate between
showing the new Preset name and name of the Preset about to be overwritten.
6. Press the
Store
button again to save the changes.
Press the
Select
or
Drums
buttons at any time to abort the Store procedure.
The procedure for copying one Preset to another Preset location is the same. Simply use the
Footswitches
to select the Preset that you want to copy, then follow the steps listed above.
Store
9
Summary of Contents for Artist RP300A
Page 1: ...User s Guide...
