Page 6 of 11
INEAR User Guide
5 - OPERATION INEAR
Button
LED
The wireless INEAR has a LED which indicates delivering multiple information to the user.
Operating as Connectable
:
The INEAR was recently paired, and integrated in the BELTPACK.
It will be identified and connected automatically by the BELTPACK. If it does not
automatically connect to the BELTPACK, it is because it is not paired.
The LED will flash
:
- Two rapid flashes.
- Followed by a two-second pause.
- Two rapid flashes.
“Discoverable” mode :
The INEAR is enabled to be visible for all BELTPACK. Press and hold the INEAR button for 6
seconds in order to start the discoverable mode. This mode is used to pair an INEAR with a
BELTPACK.
The LED will flash
:
If the INEAR is already paired to a BELTPACK when it is switched on, it will be in
“Connectable" mode.
- Fast flashing for 120 seconds.
If the INEAR is not paired to a BELTPACK when it is switched on, it will be in "Discoverable"
mode.
