8
Installation
Installation
The recommended method for connection of devices to the HDMI™ Coax
Transmission System is listed in the following steps. Please ensure this order is
followed to enjoy the full function of the device.
1.) Ensure the digital video/audio source and display is turned off.
2.) Connect the digital video/audio source to the input port of the DigitaLinx™
HDMI™ Coax Transmission System.
3.) Connect the digital display to the output port of the DigitaLinx™ HDMI™
Coax Transmission System.
4.) Power up the DigitaLinx™ HDMI™ Coax Transmission System. Power LEDs
on both the transmitter and receiver should be illuminated.
5.) Power up the digital display.
6.) Power up the digital video/audio sources
7.) HDCP handshaking operation can take up to 20 seconds.
8.) Check the LED power indicator and status indicators on the DigitaLinx™
HDMI™ Coax Transmission System. The signal indicators should be lit when
the devices are correctly attached. It does not indicate successful data
transmission between the transmitter and receiver. See troubleshooting on
Page 12 if the LED’s are not lit.
