DigitaLinx DL-FHD2, Owner'S Manual

Page: 8 / 17

DL-FHD2 Owners Manual
8
Installation Instructions
Quick Start
Mount the Extender Set
1� Mount the extender set
2� Connect a source
3� Connect a display
4� Connect audio input / output (optional)
5� Connect control (optional)
6� Apply power
At least 2 inches of free air space is required on both sides of the DL-FHD2 for proper side ventilation. Avoid
mounting the DL-FHD2 near a power amplifier or any other source of significant heat.
Attach the supplied mounting rails to the sides of the transmitter / receiver. Once the rails are installed the
receiver can be mounted in an A/V enclosure or on the wall behind a display or above a projector.
Connect an HDMI source device to the HDMI input on the transmitter using an HDMI cable that is less than or
equal to 5 meters in length�
Connecting a Video Source
HDMI Input