DL-FHD2 Owners Manual
6
Front and Rear View
Transmitter
1
2
3
4
5
6
7
8
9
1�
OPTICAL OUT (A B)
•
LC-LC Fiber Optic output for duplex LC fiber to DL-FHD2 receiver connection
2� HDMI IN
•
HDMI input port for connection to video sources
3�
AUDIO OUT (ARC)
•
Digital audio output port (TOSLINK) for routing multi-channel audio from DL-FHD2 receiver to
audio amplifier or mixer
4�
IR IN / IR OUT
•
3.5mm IR input port for connection to IR receiver or IR system
•
3.5mm IR output port for connection to IR emitter
5� RS232
•
3 pin Phoenix connector port for connecting and passing RS232 control to receiver / display
location
6� DC 12V
•
Locking power port, connect DC12V power adapter to transmitter (both TX and RX must be
powered individually to activate circuit)
7� FRONT PANEL DIAGNOSTIC LEDs;
• POWER
- When solid, the DL-FHD2 extender is receiving power from the DC power supply
• LINK
- When solid green, the transmitter and receiver fiber optic links are successful
• STATUS
- When solid green, signal data is transmitting successfully between the transmitter and
receiver
8�
AUDIO MODE SELECTION SWITCH
• ARC
- Switches audio mode to ARC
• AUDIO
- Switches audio mode to audio pass through (from receiver)
9� FW
•
Micro USB B port for firmware updates
Summary of Contents for DL-FHD2
Page 2: ...DL FHD2 Owners Manual 2...
