6. Firmware Update Method.
6-1. Main Board Firmware Update.
1. Set Main Powe
r off. (Pull out power cord from LCD TV.)
2. Insert Phone Jack using RS232 to stereo jack Cable below Fig. 1.
Fig. 1. Main Board Input Jack.
3. Double Click ‘Flash express_logo.exe’ in unzipped Firmware file below Fig. 2..
Fig. 2. Firmware program files in directory.
Fig.3. Firmware Update Program
4. After clicking ‘
’, assign directory saved ‘Flesch_logo.exe’ in PC
5. After clicking ‘ ’, assign ‘WARE3_boot.inf’.
6. If you turn on the LCD TV after clicking ‘
’, you make progress firmware update.
★
Attention.
1. If you could hardly make progress update, retry varying port after clicking ‘ ’ of number 7
on Fig. 2
2. After firmware update finished, you must confirm firmware version and do factory reset.
Æ
Method to enter factory mode.
Push 1
Æ
Mute
Æ
Select/Enter
Æ
Mute
key on remote controller
4
5
7
6
