30
Installation Guide
GB
3. Skip:
Press the green function key on the remote control. This brings up the „Skip“ screen,
which is now active.
Select the channel you want to skip.
An arrow will appear in front of this channel after you press the OK button.
You can now select further channel and mark them to be skipped by pressing OK.
Press the green function key to deactivate this function. The channels to be skipped will
be saved when you exit the menu with the EXIT button and confirm the prompt.
These channels will now be skipped over when you „channel surf“.
If you have enabled the changes made in the FAV, Lock and Skip menus by acknowledging
the confirmation prompt, you can undo these changes by following the same steps
described above.
4. Move:
Press the yellow function key on the remote control. This brings up the „Move“ screen,
which is now active.
Select the channel you want to move using the OK button.
You can move several channels at once.
Use the Up arrow or Down arrow key to select the target channel number you wish to
use.
Press the yellow function key to carry out the move. The moved channels will be saved
when you exit the menu with the EXIT button and acknowledge the confirmation prompt.
8. USING THE RECEIVER
