DIGITALas A260 TTLOCK, User Manual

Page: 3 / 7

5 INFORMATION AND SAFETY WARNINGS:
This user manual will guide you through the functions and usages of our A260 Wi-Fi smart lock. It is
important that you follow the instructions and regard all notes that appear throughout this manual.
Consult this manual before you attempt to use this lock. If you have any questions that not answered by
this manual or on need of non-routine service, please call our customer service hotline or send FAQ to us.
5.2 Safety Warnings:
5.1 Introduction
Drill Hole with Template
6
PREPARING TO INSTALL
6.1 Line Drawing
When reading this manual, note these icons: notes with the icon Must be read, understood and
obeyed to prevent injury or damage to the lock.
General Usage
This lock shall only be used as described in this manual.
Verify that all parts of the lock are accounted for. If any parts are missing, please contact our
service person.
Under factory default state,the lock is on always open status after you install the lock(no power on).
It means the handle is free and lock can’t be locked, you shall power on the lock with batteries or
set admin and pair the lock with the APP and then the lock will be under private mode automatically.
Handle directions are reversible, please kindly follow chapter 6 to change the direction if the door
opening direction is not same with your lock. Should you have any problem, please contact our
service person.
There is protective film on the front touch panel, if there are some scratches on the film, please
remove the film if you need.
Please use 4pcs AA batteries. Do not mix old and new batteries or other Zn/Mn batteries.
Never insert objects into the lock other than batteries as described in this manual.
Verify all surfaces are flat and level before beginning installation, installation on doors or surface
with any types of deformity such as gaps or warping may cause the lock to malfunction or fail to
operate entirely.
Never apply any cleaner directly to any part of this lock. Only use clean water or mild cleaner on
a soft non-abrasive cloth when cleaning.
Potential shock warning: do not allow water or liquids to get into the lock’s electric parts.
The lock must be used with TTLOCK APP. The lock will function without the APP but full functionality
may only be achieved when the APP is on use.
5.3 SALES AND SERVICE TERMS
Any change submit to our confirmation
Any error or question in our manual or sales term, please feel free to contact with us.
It is forbidden to copy our manual and for other usage, except the authorized company and users.
For any wrong operation or installation to the user or third party, we do not responsible for the duty.
For the damage caused by anthropic factor or inevitable reason, we do not pay for the loss or maintain
for free, please check our after sale service terms.
Please do not take apart the lock if you are not technician, if necessary, please make the operations
under the guide of technician.
Notice: there maybe a little difference for product pictures with real product, please subject to our
real products.After changing the battery, please do not throw away the battery, kindly refund to recycle
bin in case of pollution!
Limited 1-Year Electronic Warranty Limited Lifetime Mechanical and Finish Warranty
This A260 product comes with a 1-Year Limited Warranty on Electronic Parts and a Limited Lifetime
Mechanical and Finish Warranty against defects in materials and workmanship under normal use to
the original residential user. Proof of purchase and ownership is required for the warranty to be in effect.
Please read the manual carefully before use!
3
4
6.2 Adjust Direction
6.2.1.Adjust from Right Direction(For Sample) to Left
Drawing Center Line
Drill hole for Strike Test with Mortise
Step 1 Step 2 Step 3
Draw a horizontal center line inside and outside the door at 1 meter from the ground. Fold the hole
template,make the handle center line align at the door horizontal center line, then draw out the hole
lines at front and side.
1. Use the allen key to take off the screw on the right position.
2. Turn the handle to 180 degree counterclockwise.
3. Tighten the screw in left position.
6.2.2.Adjust from Right Direction(Back Panel) to Left
1. Use the allen key to take off the screw on the right position.
2. Turn the handle to 180 degree counterclockwise.
3. Tighten the screw in left position.
1
2
3
180°
2
1 8 0°
1
3