Press the Enter (Return) key on your PC and the WLN10 should display the current firmware version it is
running. In the image above this is V2.21. There have been a few different firmware revisions and the table
below shows what they are;
•
V2.21 - Original Ad-Hoc Version
•
V2.32 - Updated Ad-Hoc Version that was shipped for the first 9 months in 2011
•
V2.45 - First Access Point Version that was shipped for the last 3 months in 2011
•
V4.00 - Latest Access Point Version that we will update to
Ad-Hoc can be less stable over long periods of time than Access Point with some operating systems, plus
Ad-Hoc is not supported by Android devices.
Type exit to come out of Command mode.
You will now need to download the WLN10 Update Macro Scripts from our Support website…
Once downloaded, open the ZIP file and extract the relevant Macro file for the unit you have. Run the TTL
Editor program, open the Macro file and edit the Macro Script to enter the SSID and Password of your
Home/Office Network.
This procedure assumes that your office network is a normal DHCP enabled network connected to the
internet with no special proxy or fixed IP address settings and that the Firewall will allow access to an
external FTP site.
Change the text YOUR NETWORK HERE (above the Yellow line in the image) to whatever the SSID name of
your office network is set to. This text will be case sensitive and make sure you do not delete the
apostrophe character ' at the end of the line.
