DIGITAL YACHT
WL500 Quick Start Guide
You should now return to the same window as you were at before, but now the correct location for the Windows XP
drivers should be in the white entry box to the left o
f the “Browse” button (see Fig 6). Click the “Next” button
Windows should now start to install the driver and you will see the
window shown in Fig 7. This takes a few moments to complete but
when finished you will see the window in Fig 8.
This indicates that everything has installed correctly and your WL500
is now ready to be used.
Click the “Finish” button to close the “Found New Hardware Wizard”
and return to normal Windows operation.
If your laptop has a built-in, normal wireless adaptor, then you should turn it off whenever the WL500 is plugged in.
Consult your laptop instruction manual to find out how to do this. Following this procedure whenever the WL500 is
plugged in, will ensure that you connect via the WL500 to get the best signal range possible.
The WL500 should now appear as one of the Wireless Network Adaptors available on your PC. On the taskbar, right click
on the wireless network
icon and select the option “View Available Wireless Networks”. Select the Wireless network that
you wish to connect to and click
the “Connect” button (see Fig 9).
Figure 7
Figure 6
Figure 8
Figure 9
