Quick Start Guide for iNavHub V2.00
TEL + 44 1179 554474 www.digitalyacht.co.uk
Below are two screen shots showing this pr
ocedure on an iPhone. When you select “iNavHub” you will be prompted to
enter a wireless password
– type in “inavhubpass” (all lower case and do not include the quotation marks).
When you have wirelessly connected to iNavHub, you can start to share the long range Wi-Fi connection, if you have a
WL510 connected or receive (and transmit) wireless NMEA 0183 data between an application on your wireless device
and the boat’s navigation system. These two activities can be done simultaneously with no additional configuration
changes or switching of wireless networks.
5. Sharing Long Range Wi-Fi Connection
When you use the iNavHub with the Digital Yacht
WL510, all routing of the wireless connections to
the internet are automatically configured.
After you have connected wirelessly to the
iNavHub as detailed in section 4, you should be
able to display the WL510 login page by typing
192.168.10.20 in to the address bar of your
internet browser, see screen shot below…
This shows that communication between the
iNavHub and WL510 is working correctly and you
should now be able to log on to the WL510 and
initiate a long range wi-fi connection with a Marina
or local hotspot in the normal manner detailed in
the WL510 Quick Start Guide. Once the long range
connection is established then all wireless devices
connected to iNavHub will be able to access the
internet.
