Quick Start Guide for iNavHub V2.00
TEL + 44 1179 554474 www.digitalyacht.co.uk
If the unit is to be hidden away behind a bulkhead, Wi-Fi reception maybe reduced. In this situation, it is advisable
to fit an SMA extension cable, which is available from many suppliers. The Extension cable length should be kept
to a minimum, between 1m and 3m would be recommended.
To fit an SMA Extension cable, unscrew the 5dB antenna from the iNavHub and screw the extension cable
between the iNavHub and the antenna. Now you will be able to hide the iNavHub unit behind a bulkhead and
mount the antenna in the cabin for maximum Wi-Fi range.
Provide power connections to the unit from the boat’s supply. Power is connected to the iNavHub’s two core
Power cable on the Red and Black wires. The Red wire is the positive (+) connection. The Black wire is the
negative (-) connection.
Connect the stripped wires to the nearest source of primary 12V or 24V DC power.
Ensure that the supply is
connected via the supplied 1A fuse or suitable circuit breaker.
Add the fuse in the positive power connection
to the unit if necessary.
Installation Step 2
Use suitable fixings (not supplied) to fix the INavHub to a flat surface
– using the dimensions and details shown in
the drawing below. Note that the unit may be installed in any orientation.
Dimension drawing
Once the unit is secured in place, position the antenna so that it is pointing vertically upwards or if connected via
an extension lead, mount and secure the antenna within the cabin area.
