User Manual for AIT2500 V1.01
TEL + 44 1179 554474 www.digitalyacht.co.uk
4.
Click “Write Configuration” to save the data to the AIT2500
5. Read the warning message carefully and proceed only if the MMSI number is correct.
6. If you are configuring a new unit with a new MMSI number then a warning message will be displayed
7. Read the warning message carefully and proceed only if the MMSI number is correct.
8. Should you make a mistake or need to change anything in the future, all configurations and settings, except the
MMSI, can be changed by running proAIS2 and following this procedure again
9. Configuration of the AIS Class B+ Transponder is now complete
*Note:
For security reasons the MMSI can only be programmed once. Make sure you enter the correct
number and double check when ProAIS2 warns you regarding MMSI programming. The MMSI can
only be changed by returning the unit to your dealer.
