7
B
ASE INSTALLATIONS*
Remove the dome cover by loosening the 3 screw located at the Lid(Upper).
Vandal dome uses the torx screws. Use the supplied Torx Wrench.
Surface Mount
Using four ST4X35 screws provided, mount the surface mount plate to a sturdy
surface. Using three screws, fix flush mount base to the surface mount plate.
Flush Mount
Using four ST4X35 screws supplied, mount the surface mount plate to a sturdy
surface.
2
1
3
T20 M4 X 16
Plastic Anchors
ST4X35
ST #8 - 32 x 0.75
Surface Mount
Flush Mount
NO IR
NO IR
IR
IR