38
EXPOSURE
COLOR
DAY & NIGHT
BRIGHTNESS
SHUTTER
BLC
MAX_DR
WB MODE
R-Y GAIN
B-Y GAIN
EXIT JUMP
Day & Night Mode
AGC
STARLIGHT
EXIT JUMP
0 ~ 99
1/60 / 1/100 / FLC / 1/250 ~ 100000 / SENS-UP x2 ~ x256
OFF / ON
BLC (Back Light Compensation)
0 ~ 255
AWC / ATW / MANUAL (AWC is recommended.)
0 ~ 255
AUTO / COLOR / BW / EX-CONT
COLOR
▬►
BW
: Switching from COLOR to BW; If the number is higher, the camera will only switch during a super low light condition.
BW
▬►
COLOR
: Switching from BW to COLOR; This number should be always lower than COLOR to BW
Read Time
: time interval to switch from COLOR to BW
EXIT JUMP
C_SUP
A_SUP
COLOR
EXIT / SAVE&EXIT / FACTORY SET
0 ~ 100 (not available when 3D-DNR is on)
Color Suppression
: Color will be reduced at low illumination, if the C_SUP Level is higher.
B&W : (BURST : OFF/ON) When the burst is OFF, the picture will have less noise.
OFF / ON (0~20) (Electronic Wide Dynamic Range)
HIGH / MIDDLE / LOW / OFF
AGC (AUTO GAIN CONTROL)
EXIT / SAVE&EXIT / FACTORY RESET
EXIT / SAVE&EXIT / FACTORY RESET
AUTO (x2 ~ x256) / OFF (x32 is recommended for low light application.)
0 ~ 100 (not available when 3D-DNR is on)
Aperture Suppression
: Edge sharpness will be reduced at low illumination, if A_SUP Level is higher.