WEBVIEWER*
S e t u p > E v e n t > S e n s o r S e t t i n g s
T h e M E G A p i x P T Z c a m e r a s u p p o r t s u p t o t h r e e ( 3 ) s e n s o r c o n n e c t i o n s
a n d 1 R e l a y o u t p u t c o n n e c t i o n . T o U s e a S e n s o r o r R e a l y :
Sensor- Select sensor type(NO/NC) and check sensor number. To use relay out, check relay number
and set time to activate.
- NO(Normal Open): Sensor is activated when it closes. (Example: Door normally remains open and
an alarm is triggered when the door closes.)
- NC(Normal Close): Sensor is activated when it opens. (Example: Window normally remains closed
and an alarm is triggered when the window is opened.)
Relay Activity- To use Relay Activity, select USE and set time to activate.
Select Apply to save changes.
6 1
[Sensor Input Settings]
[Relay Output Settings]
