DAY NIGHT
DAY & NIGHT
AUTO Camera switches between day and night
automatically depending on certain light
levels.
COLOR Camera always stays in day mode.
BW
Camera always stays in night mode.
※
If
AUTO
is selected, please define the following settings.
▪ BURS
T: ON / Off. If ON is selected, the camera provides a color burst signal in
night mode. If OFF, no color burst signal is provided.
▪ COLOR → BW: Adjusts the light level at which the camera switches from
day (color) to night (BW) mode. The higher the number, the lower the light level.
▪ BW → COLOR: Adjusts the light level at which the camera switches from
night (BW) to day (color) mode. This number should be lower than the value of
COLOR→BW above.
▪ Read Time: Sets how many seconds camera waits to adjust between COLOR → BW and
BW → COLOR . Select from 3~12 seconds.
C-SUP.
0~100
Adjusts the color suppressing level. (3D-DNR must be OFF to adjust this level.)
Adjusts aperture suppressing level. (3D-DNR must be OFF to adjust this level.)
A_SUP.
0~100
23
EXIT JUMP
SAVE & EXIT
FACTORY SET
Exit the OSD after saving the current settings.
Go back to factory default settings.
EXIT
Exit the OSD without saving.
Summary of Contents for DWC-V4567WD
Page 8: ...8 EASY INSTALLATION ...
