Digital Watchdog DWC-MTT4Wi36, User Manual

Page: 42 / 63

Select “Enable” to enable the RTSP function.
Port: Access port of the streaming media. The default number is 554.
RTSP Address: The RTSP address (unicast) format that can be used to play the
stream in a media player.
Multicast Address
Main stream: The address format is
“rtsp://IP address: rtsp port/profile1?transportmode=mcast”.
Sub stream: The address format is
“rtsp://IP address: rtsp port/profile2?transportmode=mcast”.
Third stream: The address format is
“rtsp://IP address: rtsp port/profile3?transportmode=mcast”.
Audio: Having entered the main/sub stream in a VLC player, the video and audio will
play automatically.
If “Allow anonymous login…” is checked, there is no need to enter the username and
password to view the video.
If “auto start” is enabled, the multicast received data should be added into a VLC player
to play the video.
Note:1. This camera support local play through a VLC player. Enter the RTSP address
(unicast or multicast, eg. rtsp://192.168.226.201:554/profile1?transportmode=mcast)
in a VLC player to realize the simultaneous play with the web client.
2. The IP address mentioned above cannot be the address of IPv6.
3. Avoid the use of the same multicast address in the same local network.
4. When playing the video through the multicast streams in a VLC player, please
pay attention to the mode of the VLC player. If it is set to TCP mode, the video cannot
be played.
5. If the coding format of the video of the main stream is MJPEG, the video may
be disordered at some resolutions.
6 .6.8 UPNP
If this function is enabled, the camera can be quickly accessed through the LAN.
Go to Config
→
Network
→
UPnP. Enable UPNP and then enter UPnP name.
6 .6.9 Email
If you need to trigger Email when an alarm happens or IP address is changed, please
set the Email here first. Go to Config→Network →Email.
42