8
Installation -
Installation
1.
Pull out the slide plates at the bottom of the
main unit.
2.
Using the main unit, mark and drill the necessary
holes in the mounting surface to align with the
slide plates’ holes.
3.
Insert the anchor blocks and tighten them into
the mounting surface.
4.
Align the main unit with the mounting holes
and secure it to the mounting surface using the
included tapping screws.
Main Unit Installation
Reset to the Factory Default
Resetting the camera: Press the
reset button in the back of the
main unit. Pressing the button
for five (5) seconds will initiate
a camera-wide reset of all the
settings, including the network
settings.
Warning:
If you press the ‘Reset’ button, you will lose all
setting data. If needed, please, make a note for
further installation.