
Universal HD over Coax
®
5MP Camera
7
5
CHANGING THE CAMERA’S SIGNAL
The camera supports three analog signals: HD-Analog, HD-TVI, HD-CVI and analog signal
up to 960H.
In order to switch the camera’s signal between the available options, locate the button
switch on the signal cable. The video outputs will recycle by holding and pressing the
button in the video switch cable for 5 seconds.
NOTE: The camera’s factory default resolution is 4MP at 30fps. However, the camera
can display video up to 5MP resolution at 20fps. In order to change the camera’s
resolution, go to the camera’s OSD menu > ADJUST > OUTPUT MODE.