DWC-B8553TIR, DWC-B8563TIR
6
4
INSTALLATION
1.
The mounting surface must withstand three times the weight of your camera.
2.
Do not let the cables get caught in improper places for the electric line cover
can be damaged. This may cause a short or fire.
3.
Using the mounting template, sheet or the camera itself, mark and drill the
necessary holes in the wall or ceiling.
4.
Pass wires through the mounting bracket and make all necessary connections.
Connect the BNC and power cables to the camera. Connect the camera to a
DVR or encoder. See section 7 for more information.
5.
The cameras support three analog signals: HD-Analog, HD-TVI and HD-CVI.
See section 5 for more information on how to change the signal.
6.
Mount the rubber plug to the gap of the mounting base. Then, secure the
mounting base with the camera to the wall with the provided screws.
7.
Adjust the camera’s pan and tilt (see section 7).
8.
If your camera supports a varifocal lens (DWC-B8563TIR models), adjust the
zoom and focus as needed (see section 7).
9.
Remove the protection file softly to finish the installation.