background image

22

PRIVACY (CONT.)

You can hide some parts of the camera’s view to protect privacy and sensitive data. 
A total of 16 different privacy masking zones are available. 

   POLYGON 

MASKS

 

 

 

- ZONE NUM: Select the zone number you want to setup from 0 to 7. 

 

 

 

- ZONE DISP: To enable it, turn the display option ON. 

 

 

 

-POS0-X: Move the mask’s upper left angle left to right.

 

 

 

-POS0-Y: Move the mask’s upper left angle up and down.

 

 

 

-POS1-X: Move the mask’s upper right angle left to right.

 

 

 

-POS1-Y: Move the mask’s upper right angle up and down.

 

 

 

-POS2-X: Move the mask’s lower right angle left to right.

 

 

 

-POS2-Y: Move the mask’s lower right angle up and down.

 

 

 

-POS3-X: Move the mask’s lower left angle left to right.

 

 

 

-POS3-Y: Move the mask’s lower left angle up and down.

- Y LEVEL- The higher the number, the brighter the color will appear.
- CR LEVEL- The higher the number, the more red tone will be added to the zone’s color. 
The lower the number, the more green will be added to the zone’s color.
- CB LEVEL- High CB Level + High CR Level = Red
                     High CB Level + Low CR Level = Blue
                     Low CB Level + High CR Level = Orange

Summary of Contents for DW-LPR650AHD

































Reviews: