16
EXPOSURE (CONT.)
BLC (CONT.) BACK LIGHT COMPENSATION
This function has been set specifically to allow proper license plate capturing.
It is not recommended to change the settings on this function.
- H-POS: Move the zone left or right. The higher the number, the zone
will move to the right.
- V-POS: Move the zone up or down. The higher the number, the zone
will move down.
- H-Size: Adjust the zone‘s size horizontally. The higher the number,
the right side panel will move further to the right.
- V-Size: Reset the zone’s size vertically. The higher the number, the bottom panel will move down.
DRC
DYNAMIC RANGE COMPRESSOR
This function has been set specifically to allow proper license plate capturing. It is not
recommended to change the settings on this function. Select: Off, Low, Middle, or High.
DEFOG
Allows the camera to process a scene that is obscured by fog or weather conditions
and provides a visibly improved image.
AUTO / MANUAL: Select AUTO to have the DRC levels adjusted automatically.
LEVEL: Set the DEFOG level from LOW / MIDDLE / HIGH.
AGC
AUTO GAIN CONTROL
0~10
AGC enhances the picture brightness in low light conditions. A higher level AGC
setting makes the images brighter; however, it could increase the amount of noise.
3D DNR
3D DIGITAL NOISE REDUCTION
OFF/ LOW/
3D-DNR reduces the noise on the screen in low light conditions and
MID/ HIGH
allows for clearer images, even at night.
