Net-2000™ Voice Codec Unit
User’s Manual
Page 8
Section 3 – Net-2000™ VCU Control
DVSI Confidential Proprietary
Note:
The Ethernet MAC address and default hostname of the VCU is derived from the serial
number of the VCU. The MAC address will begin with 00:01:FD followed by the last six
digits of the serial number. The hostname is VCU followed by the last six digits of the
serial number. For example, if the last six digits of the serial number are FF1234, the
MAC address is 00:01:FD:FF:12:34 and the hostname is VCUFF1234.
When no DHCP server is available on a LAN the VCU’s RS-232 serial port can be used as a
console terminal for low-level network setup. With the serial cable connected and the terminal
running type a few carriage returns from the PC’s keyboard. The Net-2000™- P25 VCU will respond
with the console prompt as shown below:
adsh>
At the adsh prompt the VCU’s network settings can be configured or changed using the terminal
console command “network” as follows:
adsh>network [-dhcp] [-h hostname] [-w workgroup] [-i ipaddress] [-m
netmask] [-g gateway] [-n nameserver][-d domainname]
The arguments to the network command are described below:
Arguments
Use
Result
-dhcp
when DHCP is available on LAN
DHCP is enabled
-h
Sets the hostname of the VCU
-w
anytime
Sets the Windows workgroup of the VCU
-i
Sets the static IP address
-m
Sets the IP address of the netmask
-g
Sets the IP address of the gateway
-n
Sets the IP address of the nameserver
-d
use only when DHCP is disabled
Sets the domain name of the VCU.
Table 3 DHCP Set-up command Arguments
The following command example results are show in the table below
adsh>network –h net2k1 -w lab -i 192.168.1.100 -m 255.255.255.0 -g
192.168.1.250 -n 192.168.1.1 -d domain.com
Arguments
VCU Result
Example
DHCP is NOT enabled
-h
HOSTNAME
net2k1
-w
Windows WORKGROUP
lab
-I
STATIC IP address
192.168.1.100
-m
NETMASK IP address
255.255.255.0
-g
GATEWAY IP address
192.168.1.250
-n
NAMESERVER IP address
192.168.1.1
-d
VCU DOMAIN NAME
domain.com
Table 4 DHCP Setup Example
NOTE: Do not mix the -dhcp argument with the -i -m –d -g -n arguments.