4
1
Introduction
This brief guide explains how to use and set up your M3-320 decoder board. It is
intended for Digital View staff who assemble ViewStream product for demos or
for customers, and for resellers.
The M3-320 is an MPEG decoder board designed to use with Video Monitors for
playing MPEG-2/MPEG-4 video and audio files.
MPEG-2, MPEG-4* video
JPEG picture
MP3 audio file
Video signals of PAL & NTSC standard
Composite signal output
DVI output
Audio output
RS-232 port
USB Update
LAN (RJ-45) port
* DivX MPEG-4 format
IMPORTANT USAGE NOTE
☞
All media filenames must be in 16.3 format (e.g. xxxxxxxx.xxx) though
combinations with 7.3, 10.3 etc are fine.
Where: “16” is the maximum of alpha-numeric character to be used.
“3” is the file extension like .mpg / .jpg / .avi etc.
☞
Do not use any “Non alpha-numeric” characters like ‘~’, ‘_’, ‘-‘, ‘&’, ‘^’,
etc.
NOTE: If ‘Non alpha-numeric character’ or the ‘8.3’ format are not followed, the
player will not recognize the playlist.
This equipment is for use by developers and integrators; the manufacturer
accepts no liability for damage or injury caused by the use of this product. It is
the responsibility of the developer, integrators or other users of this product to:
Ensure that all necessary and appropriate safety measures are taken.
Obtain suitable regulatory approvals as may be required.
Check power settings to all component parts before connection.
DISCLAIMER
There is no implied or expressed warranty regarding this material.
Page
