26
7.2 Operating functions
The following key buttons are default in “Simple Play mode”. (This operation
requires button switch-mount or 8-segments touch screen connection.)
PLAY (Button 1)
•
Resumes playback of videos from track 1 after
STOP has been pressed.
•
Resumes playback of the track from the point
that it has been set to PAUSE.
•
Playback is reset back to the beginning of the
specific track which is being played at the time
the PLAY button is pressed.
STOP (Button 2)
•
When STOP is pressed the video stops playing
and a blank screen is displayed.
PAUSE (Button 3)
•
When PAUSE is pressed the video image
instantly freezes.
•
Press Pause again or PLAY to resume normal
playback from the position where it was paused.
REPEAT (Button 4)
•
When REPEAT is pressed the current track loop
back on itself continuously.
•
To disable the repeat mode press REPEAT,
PLAY, PREVIOUS TRACK or NEXT TRACK . When
the track plays to the end it will playback the
next track (and etc.) as normal.
NEXT TRACK (Button 5)
•
The NEXT TRACK function can be activated only
when a track is already playing. When NEXT
TRACK is pressed the current video stops
playing and jumps directly to the start of the
next track.
VOLUME - (Button 6)
•
Decreases audio output volume setting.
(Button 7)
•
Increases audio output volume setting.
MUTE (Button 8)
•
When MUTE is pressed, all the tracks will have
no sound.
•
Press MUTE again to resume the normal sound
in all tracks.
Note : All above buttons can be re-defined by DV Studio
*
software if operating in
playlist mode.
*DV Studio software can be found and downloaded from
www.digitalview.com
Page