Page 8 of 30
OSD Functions
Image
Brightness
Increase/decrease brightness level.
Press – or + (- + ) Total : 100 steps
Contrast
Increase/decrease contrast level.
Press – or + (- + ) Total : 100 steps
Sharpness
Increase/decrease sharpness level.
Press – or + (- + ) Total : 8 steps
Color
Color temp
4
4
4
4
(Adjust the warmness of the image displayed. The higher temperature the
coolest image looks like. The lower temperature the warmest image looks like.)
4200k
5000k
6500k
7500k
9300k
User
4
4
4
4
R Press – or + (- + ) Total : 100 steps
G Press – or + (- + ) Total : 100 steps
B Press – or + (- + ) Total : 100 steps
Reset
Gamma (0.4/0.6/1.0/1.6/2.2)
Display
Backlight
4
4
4
4
Invert
B/L Invert : Invert for the backlight brightness
Control
D/A / PWM : Selection for voltage level dimming control / PWM dimming control
Frequency
Backlight frequency 100 ~ 440Hz in a step of 20
B/L
Backlight brightness adjustment
Wide Screen mode
DDC programming: Video timing
CVT timing
[Refer to Appendix V for the details timings support]
System
4
4
4
4
Input : Select the input video signal
DVI 1
DVI 2
Autoscan : Enable the Auto source seek function
Timer : OSD Timeout in seconds
Press – or + (- + ) From ON, 5 to 60 (Total : 13 steps, ON standard
for Always ON)
Rotation : OSD menu rotation in degree
0
90
180
270
Position : Adjust OSD menu position
Transparency
: Set OSD transparency
Press – or + (- + ) Total : 100 steps
Reset : Load factory default settings.
Press down on OSD keypad to factory reset
For Smart ISP firmware upgrade
Remark :
Items marked
4
have sub menus.
Exit the OSD menu to save the setting chosen