© Digital View Ltd 2011
www.digitalview.com
Page 7 of 38
LCD DISPLAY SYSTEM SETTINGS
NOTE: By way of explanation the following refers to a set of sample buttons that may be obtained as an option. In addition
to power on/off and connection for backlight brightness the controller provides an On Screen Display of certain functions
which are controlled by 5 momentary type buttons (analog VR type) or 8 momentary type buttons (digital type):
Controls
Analog VR type
Digital type
On/Off – turns controller board power on
VR toggle switch
On/Off button
Brightness – controls backlight brightness
Rotary VR
Brig/- buttons
Menu
–
Turns OSD menu On or Off (it will auto time off)
Menu button
Menu button
Select down
–
Moves the selector to the next function (down)
SEL DN
SEL DN
Select up
Moves the selector to the previous function (up)
SEL UP
SEL UP
+
–
Increase/Select the OSD parameter values
–
Go into the sub-menu page
–
Confirm to select the OSD function
+ +
-
– Decrease/Select the OSD parameter values
- -
Reset to Factory Defaults
Press and hold SEL DN
button, then power on the
controller
Press and hold SEL DN button,
then power on the controller
ON/Off/Brightness
SEL UP
SEL DN
+
-
Menu
Analog VR type
Digital type
12V / 24VDC power input :
Analog 10K VR Type OSD
switch mount uses
P/N 410680550-3 or up
12V / 24VDC power input :
Digital 10K Type OSD
switch mount uses
P/N 416100520-3 or up
12VDC power input :
Digital 10K Type OSD
switch mount uses
P/N 416100510-3
