Connecting to a PC or Mac computer is made very simple with the Scorpion XG-2
Controller. Simply plug the USB cable into the rear of the controller and then connect the
other end of the cable directly to your computer system.
On connecting your controller to your PC for the first time, you will see the ‘Found New
Hardware’ connection notification, in the bottom right hand corner of your primary display
(fig 1).
Your PC will detect that it is a standard Human Interface Device (HID) and will allocate it
the correct driver, in this case, that of a USB keyboard. Once the device is recognized the
following notification will be displayed:
Once the connection notification message disappears, your controller is ready for use.
The controller will send the appropriate keyboard signals to your computer that correspond
to the arcade controls on the panel.
After the first successful installation of your controller, you will not see these messages
again on successive installations.
-- Converted from Word to PDF for free by Fast PDF --
www.fastpdf.com
--
