In the unlikely event that you encounter a problem with your Scorpion XG-2 Controller, you
can carry out the following checks:
•
Check the security of your USB Cable – if in doubt try an alternative cable
•
Check that your PC software is functioning correctly – you can check the controller
output by opening up Word or Notepad software to see if the Controller is outputting
keystroke data. Alternatively you can load the Key This software which will identify
all keys being pressed at any time.
•
Check the USB connectivity with your PC’s operating system in the following way:
Click START > CONTROL PANEL
-
then double-click on the ‘System’ tab
Click on the ‘Hardware’ Tab
-
then click on ‘Device Manager’
Expand the ‘Human Interface Devices’ list by clicking on the ‘+’ symbol as shown below:
-- Converted from Word to PDF for free by Fast PDF --
www.fastpdf.com
--
