DR-4000 Series Professional UHF Wireless Systems
DR-4600 Handheld Dynamic Microphone System
DR-4500 Instrument Body Pack System
www.digital-reference.com
5
TRANSMITTER SET-UP
DR-T40 Handheld
• Unscrew the body at the neck area between the
microphone and capsule.
• Slide the sleeve down to expose the battery terminal.
• Insert two AA batteries, noting the polarity instructions
in the battery compartment.
• Close the sleeve.
• Turn the Power switch On. The LCD window will light
Blue for a few seconds.
• Locate the IR window on the back of the DR-T40
transmitter and hold it 4” in front of the IR window of
the Receiver.
• Press the Sync button on the Receiver and wait
4 seconds.
• The LCD window on the transmitter will briefly
turn blue, and indicate the same CHANNEL/GROUP as
the Receiver.
• The Receiver’s LCD will show RF meter bars, and an
antenna icon.
• If sync fails, use the transmitter’s SET and UP
DOWN buttons to match the Transmitter’s GROUP/
CHANNEL to the Receiver’s GROUP/CHANNEL.
• The wireless system is now ready for use.
4”
NOTE: Receiver IR window and transmitter IR port
must be facing each other.
8868 Digital Ref 4600 Manual.indd 5
10/27/09 10:37:12 AM
