manualshive.com logo in svg

Digital Projection HIGHlite 660 Series, User Manual, Page: 9 / 109

Share
Download
Digital Projection HIGHlite 660 Series User Manual Download Page 9

Digital Projection 

HIGHlite 660 Series  

FITTING THE LENS 

Installation and Quick-Start Guide

Inst 5

Rev E November 2012

Fitting The Lens

• 

Remove the six screws securing the front cover to the body of the projector.

• 

Remove the front cover from the projector.

• 

Push down the lens holder tab.

• 

Hold down the tab, and insert the lens into the lens aperture, making sure that the plug on the zoom drive mechanism lines up with the 

socket on the right of the lens aperture.

• 

Still holding down the tab, push the lens in firmly as far as it will go.

• 

Rotate the lens clockwise as far as it will go.

• 

Release the lens holder tab.

• 

Replace the front cover and secure it with the six screws.

Fixing 

screws

Lens 

holder 

tab

Socket

Lens

Notes

  For full details of how to use the 

controls and the menu system, see 

the 

Operating Guide

.

 Always allow the lamp to cool for 

5 minutes before:

 

- disconnecting the power 

- moving the projector

Summary of Contents for HIGHlite 660 Series














































































































Reviews:

No comments