Digital Projection
HIGHlite 660 Series
WEB CONFIGURATION UTILITY
Operating Guide
Op 28
Rev E November 2012
Web Configuration Utility
The
LAN IP Address
of the projector can be set by using the
Network
submenu, which can be found in the
Setup
menu.
Once the LAN IP Address has been set, it is possible to control all the functions available on the OSD by using the embedded Web
Configuration Utility.
To access the Web Configuration Utility, do one of the following:
•
Type the URL
http://<LAN IP Address>
into the address bar of your browser, then press
ENTER
.
•
Use the
DiscoveryTool_V1.0.exe
application as described in
Using the Discovery Tool to view your network
later in this section.
The embedded webpage shown below right should appear.
Menu examples
The webpages mirror the OSD menus, as shown in the following examples:
•
The last 3 bytes of the projector’s
MAC Address
are shown in the
Unit ID
,
00-27-86
in the example shown here.
•
The menu name is shown in orange underlined text, as in the
Main Menu
shown
here.
•
Drop-down lists are represented by similar drop-down lists, as in the
Input
Selection
list shown here.
•
Sub-menus are represented by yellow underlined links, as shown here.
Notes
For full details of how to use the
menu system, see earlier in this
Guide.