background image

Digital Projection 

E-Vision Laser 7500 & 8500 Series

Rev D January 2017

Page 6

Important Information

Product labels

Certification Statement Label

2

DLP Projector / Projecteur DLP  

(

數位投影機/

數字投影機

)

Model/Modèle/( 

型號

/

型號

) : 

AC INPUT/Entrée CA( 

輸入

/

輸入

) :        

100-130 VAC   9.5A   50/60Hz

AC INPUT/Entrée CA( 

輸入

/

輸入

) :        

200-240 VAC   4.5A   50/60Hz

This device complies with part 15 of the FCC rules. 

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, 

     including interference that may cause undesired operation.

Caution : Do not open the cover. No user-serviceable parts inside

Avertissement : ne pas ouvrir le couvercle. Le produit ne contient 

                        aucune pièce interne réparable par l’utilisateur.

警   告  : 請 勿 打 開 外 殼 , 設 備 內 無 服 務 性 維 修 之 元 件

警  告  : 請 勿 打 開 外 殼 , 設 備 內 無 服 務 性 維 修 之 元 件

警告: 此為

A

級產品,在生活環境中,該產品可能會造成無線電干擾。

在這種情況下,可能需要用戶對干擾採取切實可行的措施。

3264621200

製造商

:Digital Projection Limited

Greenside Way Middleton

Manchester, M24 1XX UK

(

製造地:中國

/

製造地:中國

) Made in China

E-Vision Laser 8500 WUXGA

Part No.: CCC-CCC

*XXXXXXXXXXXXX*

MANUFACTURED YYYY.WW

Code 39 or 128 of serial no

Complies with FDA performance standards for laser
products except for deviations pursuant to Laser 
Notice No. 50, dated June 24, 2007

LASER RADIATION

AVOID DIRECT EYE EXPOSURE

CLASS 3R LASER PRODUCT

Emitted wavelength : 450-460 nm

Max. Pulse energy: 0.376 mJ, Pulse duration: 0.74 ms

激光輻射  避免眼睛受到直接照射

  3R

  激光產品

波長 : 

450-460 nm

最大脈衝能量

: 0.376 mJ, 

脈衝時間

: 0.74 ms

RAYONNEMENT LASER

EXPOSITION DIRECTE DANGEREUSE POUR LES YEUX

APPAREIL À LASER DE CLASSE 3R

longueur d'onde : 450-460nm

maximum énergie de impulsion : 0.376 mJ,

durée de impulsion : 0.74 ms

GB 7247.1-2012 / IEC/EN 60825-1:2007

Hazard Warning Symbol and Aperture Label

3

Complies with FDA performance standards for laser
products except for deviations pursuant to Laser 
Notice No. 50, dated June 24, 2007

LASER RADIATION

AVOID DIRECT EYE EXPOSURE

CLASS 3R LASER PRODUCT

Emitted wavelength : 450-460 nm

Max. Pulse energy: 0.376 mJ, Pulse duration: 0.74 ms

激光輻射  避免眼睛受到直接照射

  3R

  激光產品

波長 : 

450-460 nm

最大脈衝能量

: 0.376 mJ, 

脈衝時間

: 0.74 ms

RAYONNEMENT LASER

EXPOSITION DIRECTE DANGEREUSE POUR LES YEUX

APPAREIL À LASER DE CLASSE 3R

longueur d'onde : 450-460nm

maximum énergie de impulsion : 0.376 mJ,

durée de impulsion : 0.74 ms

GB 7247.1-2012 / IEC/EN 60825-1:2007

CAUTION

Possibly hazardous optical radiation emitted 

from this product. 

Do not stare at operating lamp.

May be harmful to the eyes.

ATTENTION

Ce produit peut émettre des rayonnements

optiques dangereux.

Ne pas fixer la lampe en fonctionnement.

Peut être nocif pour les yeux.

RISK GROUP 2

DLP Projector / Projecteur DLP  

(

數位投影機/

數字投影機

)

Model/Modèle/( 

型號

/

型號

) : 

AC INPUT/Entrée CA( 

輸入

/

輸入

) :        

100-130 VAC   9.5A   50/60Hz

AC INPUT/Entrée CA( 

輸入

/

輸入

) :        

200-240 VAC   4.5A   50/60Hz This device complies with part 15 of the FCC rules. 

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, 

     including interference that may cause undesired operation.

CAN ICES-3(A) /NMB-3(A)
Caution : Do not open the cover. No user-serviceable parts inside

Avertissement : ne pas ouvrir le couvercle. Le produit ne contient 

                        aucune pièce interne réparable par l’utilisateur.

警   告  : 請 勿 打 開 外 殼 , 設 備 內 無 服 務 性 維 修 之 元 件

警  告  : 請 勿 打 開 外 殼 , 設 備 內 無 服 務 性 維 修 之 元 件
警告: 此為

A

級產品,在生活環境中,該產品可能會造成無線電干擾。

在這種情況下,可能需要用戶對干擾採取切實可行的措施。

3264621200

製造商

:Digital Projection Limited

Greenside Way Middleton

Manchester, M24 1XX UK

(

製造地:中國

/

製造地:中國

) Made in China

Part No.: CCC-CCC

*XXXXXXXXXXXXX*

MANUFACTURED YYYY.WW

Code 39 or 128 of serial no

E-Vision Laser 8500 WUXGA

Manufacturer’s ID Label and Explanatory Label

1

Summary of Contents for E-Vision Laser 7500 Series























Reviews: