16
Graphic Touchscreen Keypad User’s Guide
Arming and Disarming
System Disarming
Area Systems
1. Press the Shield on the screen.
2 Press
CMD
until
ARM DISARM
displays. During entry delay this
process starts at step 4 below.
3. Press
DISARM
to disarm areas.
4. The screen displays
ENTER CODE:
.
Enter your user code and press
CMD
or present credential. The screen
displays
ALL? NO YES
.
5. Press
YES
to disarm all areas
authorized for your user code.
5a. Press
NO
to disarm only
certain areas individually.
The screen then displays
the name of each area
authorized for your code
followed by the
NO YES
display.
5b. Press
YES
to disarm the area
displayed.
5c. Press
NO
to not disarm and
to display the next area.
Note:
You may also press the area
numbers you want to disarm
while at the ALL? NO YES display.
This changes the display to
AREAS: . The area numbers you press appear in the display.
For example: AREAS: 2 4. To remove an area number from
the display, press the corresponding number on the screen.
Press CMD when done.
6. After all areas have displayed,
any alarms that occurred during
the armed period are shown.
If all areas are disarmed, the
screen displays
ALL SYSTEM OFF
in the System Status area on
the
Main Screen to confirm the
system is disarmed.
ARMED
Panic
Chime
Check-in
Fire Reset
AREA ARMED Display
ARM DISARM
RESET
1
ABC
5
MNO
9
YZ
2
DEF
6
PQR
0
3
GHI
7
STU
4
JKL
8
VWX
CMD
ALL
CHIME
PERIM
HOME
SLEEP
ARM/DISARM Keypad Display
ALL? NO YES
RESET
1
ABC
5
MNO
9
YZ
2
DEF
6
PQR
0
3
GHI
7
STU
4
JKL
8
VWX
CMD
ALL
CHIME
PERIM
HOME
SLEEP
ALL? NO YES Keypad Display
ENTER CODE:-
RESET
1
ABC
5
MNO
9
YZ
2
DEF
6
PQR
0
3
GHI
7
STU
4
JKL
8
VWX
CMD
ALL
CHIME
PERIM
HOME
SLEEP
ENTER CODE:- Keypad Display
AREAS: 1 2 4 6
RESET
1
ABC
5
MNO
9
YZ
2
DEF
6
PQR
0
3
GHI
7
STU
4
JKL
8
VWX
CMD
ALL
CHIME
PERIM
HOME
SLEEP
AREAS: Armed
Keypad Display
DISARMED
NOW
TUE
Panic
Chime
Check-in
Reset
SYSTEM ON
Attention
List
Main Screen with
Attention List Display
