7
RLE
Appendix D: Control Module Field Replacement
1. Remove Existing Control Module
a. Disconnect power from the fixture.
b. Use the tabs on the control module to rotate it 1/8-turn counter-clockwise, and then extract the module from the fixture housing.
2. Install Replacement Control Module
a. Insert the replacement module and rotate it 1/8-turn clockwise while lightly pushing down, until there is an audible ‘click’.
b. Restore power to the fixture.
Note:
To ensure network connectivity following module replacement, update the facility map file using Digital Lumens commissioning software
.
Control
Module
Tabs
