6 | DLA SENSOR INSTALLATION INSTRUCTIONS
Step Two: Make Power and Data Connections
DLA-R, DLA-S and DLA-R Wiring Examples (DLA-R shown)
0-10 VDC Wiring
DC – (Black)
DC + (Red)
+
-
(to LEDs)
Connect with
up to three (3x)
additional
DLA adapters
Switched
Line
0-10
VDC Dimmable LED Driver
Out
L
N
Black
White
Red
0-10 VDC + (Purple)
0-10 VDC – (Gray)
N
DALI – (Yellow)
DALI + (Yellow/White)
DLA-FA or DLA-CA
DLA-R, DLA-S or DLA-I
Philips
®
SR Wiring
DALI – (Yellow)
DALI + (Yellow/White)
DC – (Black)
DC + (Red)
L
N
Black
White
Philips Xitanium
SR LED Driver
(to LEDs)
Connect with
up to three (3x)
additional
drivers
DLA-R, DLA-S or DLA-I
DALI Wiring
DALI – (Yellow)
DALI + (Yellow/White)
DC – (Black)
DC + (Red)
DALI – (Yellow)
DALI + (Yellow/White)
L
N
Black
White
L
N
Black
White
DALI
Bus Supply
(Third Party)
DALI
LED Driver
(Third Party)
DLA-R, DLA-S or DLA-I
(To LEDs)
Connect with
up to three (3x)
additional
DALI drivers
Note: Use 18 to 22 AWG (0.82 to 0.33 mm
2
) wiring
Note: Use 18 to 22 AWG (0.82 to 0.33 mm
2
) wiring
Note: Use 18 to 22 AWG (0.82 to 0.33 mm
2
) wiring
