WEB POWER SWITCH III
3. Right click on your LAN connection and choose “Properties”. Highlight “Internet Protocol” and click the “Properties”
button.
4. Click the “Advanced” button. Under the IP Address settings, click “Add”
5. Enter a new IP, such as 192.168.0.10, and a subnet mask of 255.255.255.0. Press the “Add” button. This new IP is
added the list.
6. Close all windows and restart your browser for the Windows IP configuration to take effect.
Type 192.168.0.100 in the browser URL line. The login page should now be displayed. The default user name is:
admin
(lower
case) and password:
1234
Basic Operation
After power-up, the switch performs a sequence of self-tests to ensure reliability. After self-test, an internal web browser starts
using the fixed (static) IP address selected on the setup page. The switch may then be operated via a web browser. To access
the switch, simply enter the IP address in the URL field of your web browser. Click on the control page to switch circuits on and
off.
Home (Outlet Control) Page
To access the home page, first enter the IP address in web browser URL field, then log in. The home page contains links to
other pages. The first four are static links:
Outlet Control
Clicking “Outlet Control” links to the home page used for manually switching outlets on and off. Access to specific outlets is
determined by your login.
