WEB POWER SWITCH III
•
The OUTLETS ON and REMOTE ACCESS lights will flash.
Note:
This resets the admin login and IP, but not outlet names and links.
Quick Setup
Use these shortcuts if you are an experienced installer. Please read the manual if this is your first web-accessible product.
1. Connect to your LAN Using a straight RJ-45 cable. Make sure the 192.168.0.100 address is compatible with your LAN,
otherwise use a crossover cable directly to your PC.
2. Switch the web power switch on.
3. Enter 192.168.0.100 in your web browser address bar. If the login page doesn’t appear, follow the network setup
instructions.
4. Login using the default user name,
admin
(lower case). Enter the default password,
1234
5. Use the setup page to add outlet names or change the IP address.
6. Set the recovery mode for safety after a power failure.
7. Change the password for improved security.
Tip:
A lamp, outlet tester, or small appliance is handy for testing the switch. This ensures that the switch has been configured
properly before attaching equipment.
Windows IP Setup
(2000, 2003, 2008, XP, Vista, W7)
If your default Windows settings won’t access the switch IP, use a crossover cable and follow these steps to
configure
Windows.
1. Before adding an IP, close network programs and browsers. Go to the Network Settings – Local Area Network.
2. Use the keyboard shortcut <Windows-R> - type “ncpa.cpl” Click OK.
