WEB POWER SWITCH
10
Security
Your switch employs javascript encryption and secure challenge-
response authentication. This gives it good out-of-the box security.
Adding additional security takes just a moment:
Changing the Password
It’s a good idea to change your password for better security. Change
it on the setup page, and write it down in a safe place.
Restricting Subnet Access
To restrict access to your local LAN, or “Class C”, check the subnet
access setting on the setup page.
Changing the HTTP Port
Changing the HTTP port makes it almost impossible for a hacker,
even one with your password, to find your switch.
Installing Inside a Firewall
Install your switch inside a firewall, rather than directly on the internet
for an additional layer of security.
