32-Port DC Smart Switch
digital-loggers.com
10
useful for rebooting Ethernet devices which may interrupt the
web link to the switch. Clicking
Cycle
switches power off, waits
for the
Cycle time
, and then switches power back on while
conforming to the ON Sequence Delay. This can be used to
restore connectivity).
You can also cycle all relays using the Master Control on the
bottom of the page. An adjustable ON sequence
delay takes effect when relays are turned on one
after another, ehether when using the button, on
power-up, or when switching manually using the
front panel. This prevents power surges. A
separate
Cycle delay setting is provided on the
setup page.
Depending on your web browser settings, you may need to click
the Refresh button or F5 key to update the on-screen status
display after changing settings. Screen refresh rate is adjusted
in two places: on the Setup page and in your browser settings.
Setup Page
The
Setup
page allows the admin to configure:
Controller and Outlet Names
Use the controller name field to assign a name to the switch.
An example is
Rack 4 PDU.
The Controller Name will appear on
top of all pages. Assign a separate name to each outlet, such as
DSL Router 1
or
Wireless Link
to aid identification. Check the
Confirm
box to the right of the outlet name if you prefer a pop-
up window confirmation before switching critical circuits.
Power-On Sequence Delay
When a time value is entered in the
All ON Sequence Delay
field, the switch will pause for a period of time before switching
each outlet on in sequence. This delay helps prevent power
surges and blown circuit breakers which can occur when
multiple devices are switched on simultaneously. A delay of 60
seconds is suggested for server applications.
