Digital Link DL3800 DS1, User Manual

Page: 24 / 142

1-2 DL3800 DS1 Inverse Multiplexer User Guide—February 1999
1
¥ HSSI or 155-10082-01(HSSI) (Model DL1404-10)
¥ M-34 to DB-25 cables(V.35) or 155-00903-01(V.35) (Model DL1300-10)
¥ DC-37 to DB-25 (RS-449)155-00902-01(RS449) (Model DL1302-10)
Setup
Terminal Log on
Connect your terminal to the COMM port on the back of the DL3800.
Before you can log into the unit, you must make sure that terminal settings
match the DL3800. Defaults for the DL3800
COMM
port: 9600 Baud rate,
no parity, 8 bit word length, 2 stop bits. To log into the unit, Þrst press
Ctrl-X
5 times (ie, hold down control key on terminal and press
X
Þve
times). This gives you the unit number. Now type
Ctrl-X
# Unit
Number
and press
Return
or
Enter
. When prompted for user name and
password press
Return
twice, and the Main Menu on the DL3800 should
appear. The default unit number is 0.
Terminal Configuration
Only change the conÞguration items listed below. Leave other options at
the factory default settings. Note that to make a change you need to press
the up and down arrow to highlight the item, press the
space bar
until
the desired option displays, then highlight
CONFIRM
and press
Enter
before exiting the menu.
Unit Configuration
Select
Configuration
from the Main Menu. Select
Unit Configuration
.
Set the Time and Date. Set unit number to a number other than zero. Select
Confirm
, then select
EXIT
to go back to the CONFIGURATION MENU.
DTE Configuration
ConÞgure the DTE interface for either
V.35/RS449
or
HSSI
. For V.35/RS449
conÞguration set the clock to
SCTE
and
Normal TD/RD
clock. Set the DTE
loss condition for
NONE
. Select
Confirm
, then select
EXIT
to go back to the
CONFIGURATION MENU.