41
Page:
NW-STA-5016/5009/5004 User Manual
User Manual
Event setup
NOTE : you have to set it as ‘Even recording’ at ‘Schedule record setup’ to use this function.
NOTE : you have to set it as ‘Even recording’ at ‘Schedule record setup’ to use this function.
Motion
detection area
z
Motion
¾
sensitivity – select level of motion sensitivity.
level of sensitivity : 0 < 1 < 2 < ….. <9
¾
Alarm out – set to activate alarm system when any motion is detected.
¾
Motion area – select area to detect motion.
(1) all – set the whole screen as motion area.
(2) part – set motion area by block unit.
(3) off – do not detect motion.
EVENT - MOTION
1-8 9-16 OK CANCEL
CH MOTION-AREA SENSITIVITY ALARM-OUT
1 ALL 5 NONE
2 ALL 5 NONE
3 OFF 0 NONE
4 OFF 0 NONE
5 ALL 5 NONE
6 ALL 5 NONE
7 ALL 5 NONE
8 ALL 5 NONE
EVENT - MOTION
SET ALL CLEAR ALL
OK CANCEL