Upgrading the VAX 4000 Model 100A System
3.2 Procedure Overview
15. Reinstall the enclosure cover.
16. Connect the power cable, signal cables, and terminators to the system as
desired.
17. Turn on the system.
18. Have the customer reinstall system data (if necessary).
19. Fill out the forms in Appendix A.
20. Return the CPU module as instructed (see Appendix A).
Note
Firmware and VMS upgrades are not required; appropriate versions
were installed on VAX 4000 Model 100A systems at the factory.
3.3 Unpacking the Kit
Unpack the kit as follows:
1. Make sure there is no external damage to the shipping container, such as
dents, holes, or crushed corners.
2. Unpack the conversion kit and check its contents against the shipping
invoice. Table 3–1 lists the kit contents for the Model 100/100A upgrade to
Model 105A, 53XR–AA. Other items may be present, but are not required
for this conversion.
CAUTION
Static discharge can damage modules. Use an antistatic wrist strap
and antistatic mat during handling. The wrist strap and mat are in
the antistatic kit in the Digital Services toolkit.
3. Unpack the CPU module and place it on a grounded antistatic mat.
4. Save the packing material, and use it to return the original CPU module.
3–2 Upgrading the VAX 4000 Model 100A System