1.2 Inserting a Compact Disc into the RRD43 Disc Drive
To insert a disc in the RRD43, see Figure 2 and follow these steps.
1. Push the eject button inward to release the disc tray. The tray will eject
part way out; pull the tray out manually to its full extention.
2. Pick up the disc by the edges; takng care not to touch the bottom
(unlabelled) side of the disc with any part of your hand or fingers.
3. Insert the disc into the tray with the disc label facing upwards.
4. Push the disk tray back into the RRD43 until it is completely inserted and
latched.
5. The busy LED stays on for a few seconds. When the busy LED goes off,
the RRD43 can receive commands and you can read data from the compact
disc.
2
