Digital Equipment RapidPrint 500, Reference Manual

Page: 143 / 192

Set/Define Server IPaddress
11 - 25
11.52 Set/Define Server IPaddress
Sets the server’s IP network address . The IP address must be set before any TCP/IP connectivity is
available (i.e., Telnet, Rlogin, and Reverse Telnet) and cannot be changed when there are active
TCP/IP sessions. A default subnet mask will also be created when you set the IP address; it can be
overridden with the Set Server Subnet Mask command.
NOTE: If the IP address is cleared after a reboot but List Server still shows the address,
there is some other node on the network responding to that IP address.
Restrictions You must be the privileged user to use this command.
Parameters IPaddress
Enter the address in standard numeric format.
Examples
Local> SET SERVER IPADDRESS 192.0.1.49
See Also Set/Define Server Subnet Mask ; Show/Monitor/List Server ; Show/Mon-
itor/List Protocols IP ; TCP/IP .
11.53 Set/Define Server Keepalive Timer
Sets the period between “hello” messages on active, but quiet, LAT sessions.
Restrictions You must be the privileged user to use this command.
Parameters time
Enter the time period in seconds.
Examples
Local> SET SERVER KEEPALIVE TIMER 30
See Also Show/Monitor/List Server ; Network Timers .
SET
DEFINE
 
 
 
SERVER IPADDRESS IPaddress
SET
DEFINE
 
 
 
SERVER KEEPALIVE TIMER
[ ]
time