Digital Equipment PRIORIS MTE, Service Maintenance Manual

Page: 14 / 73

Server Utilities & configuration Digital PRIORIS MTE Server
14 MCS Logistics Engineering - Nijmegen
P
R
I
O
R
I
S
M
T
E
Exiting Setup
To exit Setup, press [Esc] to display the following menu options, then press one of the function keys indicated:
Key Function
Esc
Continue with SETUP.
F4 Save values- exit SETUP- and reboot.
F5 Load default values for all pages.
F6 Abort SETUP without saving values.
NOTE If the POST fails to complete successfully, access Setup and check all settings.
If necessary, press [F5] to load factory default values. Loading these values allows
the computer to operate with a minimum of options.
Configuring The Server
This chapter provides detailed information on how to configure the server using the System Configuration
Utility (SCU). Digital recommends to use the SCU to initially configure the server and each time you add
hardware, remove hardware, or change server settings.
If the server was delivered with factory-installed hardware and software, the server has already been
configured.